Dolphin pro HD+ 24V100A Manual técnico - Página 8

Navegue en línea o descargue pdf Manual técnico para Cargador de batería Dolphin pro HD+ 24V100A. Dolphin pro HD+ 24V100A 16 páginas.

Imprimir página

CONNECTIONS

NOT-DOLPROHD-00

Battery performance and life cycle are thus

enhanced.

The fully automatic charge cycles protect the

battery against overloads, and the charger can

thus be left permanently connected.

The charge programme is selected using the

"CHARGE SELECT" rotary selector on the charger

board. The selected programme number is

indicated by the arrow (programme No. 1 on the

photo above). The programme is selected using

a small flat-head screwdriver.

CAUTION

Using a charging cycle that is incompatible with

the battery technology may seriously damage

the battery.

This is particularly true for cycles with charge

voltages that exceed the battery manufacturer's

recommended charge voltage.

Considerable risk of battery overheating and

release of gases that represent a health hazard.

Curve No. 9 is compatible with a LiFeSo4 battery,

on condition that the battery has a BMS (Battery

Management System) protection function.

You should refer to the battery manufacturer's

recommendations when selecting the charge

cycle.

CONNECTIONS

NOT-DOLPROHD-00

NETWORK MODE

Toggle switch

Thumb-wheel

Charger

Master

Charger

Slave

No. 1

Charger

Slave

No. 2

Position 2: Determines whether the

charger is Master or Slave. Only ONE

Master per battery ID.

Position 2, 3, 4: Determine a battery ID,

i.e. a group of chargers operating on

one battery. Slave chargers attached to

a Master must have the same battery ID.

On Master charger: Determines the

charge curve for the Master and Slaves

operating on one battery.

On Slave charger: Determines the

charger ID (or the Slave No., from 0 to 9)

operating on one battery.

Toggle switch

Thumb-wheel

Charge cycle according

to battery technology (10

1: Master / 2 3 4: Network ID

positions)

1: Slave / 2 3 4: Network ID

ID Slave No. 1 (e.g. position 1)

1: Slave / 2 3 4: Network ID

ID Slave No. 2 (e.g. position 2)