ASI VELARE 0663-1 Manual de instalación

Navegue en línea o descargue pdf Manual de instalación para Sanitarios ASI VELARE 0663-1. ASI VELARE 0663-1 3 páginas. Btm system cabinet

VELARE™ BTM SYSTEM CABINET INSTALLATION GUIDE (PAGE 1 OF 3)

IMPORTANT: READ THESE INSTRUCTIONS COMPLETELY PRIOR TO BEGINNING

INSTALLATION & RETAIN FOR FUTURE REFERENCE WITH SUB-SYSTEM OM'S.

Open the mirrored door using the tumbler lock located at the bottom of unit in order to access the interior of the

module. Use caution when opening the door as the gas springs will raise the door from closed position. Remove

and retain the key for future access.

Pack contents:

1x 12V AC/DC Adapter with 1 output plug for Foam Soap Dispenser

1x 12V AC/DC Adapter with 2 output plugs for EL Lighting System

2x Mounting Hanging Brackets

INSTALLATION OF WALL MOUNTING HANGER HOOKS

Appropriate wall reinforcement and AC quad outlet must be prepared prior to initiating the Velare™ BTM

System installation (see Fig. 2 for blocking reference and Fig. 5 for Electrical KO location). Install the two (2)

wall mounting hanger hooks located in the interior of the module on wall using twelve (12) № 12 self-threading,

pan-head screws (by others) (Fig. 1) into appropriate wall reinforcements (Fig. 2). Hang the cabinet on wall

mounting hanger hooks (Fig. 3). Suggested mounting height is to position bottom of module 16" [406] to

20" [508] above vanity top (Fig. 4). Power can be provided to the interior of module through the Electrical

Service KO for Quad Outlets located at the back of the cabinet.

IMPORTANT: Install two (2) № 12 self-taping locking screws (by others) at the security locking holes to

prevent unit from being lifted off hanger hooks.

FIG. 1

NOTES:

Dim's inch [mm] & NTS

See TDS for Dim's not shown

THIS MANUFACTURER RESERVES THE RIGHT TO MAKE CHANGES IN DESIGN OR DIMENSIONS WITHOUT FORMAL NOTICE

MODEL №:

ISSUED:

REVISED:

FIG. 2

0663-1/2

29 JAN 2019

13 MAR 2019