Cypress Semiconductor CY8CKIT-002 Manual del usuario - Página 13

Navegue en línea o descargue pdf Manual del usuario para Placa base Cypress Semiconductor CY8CKIT-002. Cypress Semiconductor CY8CKIT-002 20 páginas.

2.4

Example Projects

MiniProg3 is supported by PSoC Programmer, a simple GUI that connects to programming
hardware to program and configure PSoC devices, and to develop custom applications.
Example projects and documentation are included in the PSoC Programmer installation and are
available in the PSoC Programmer root installation folder:
[Install path]\Cypress\Programmer\[Programmer Version]\Examples
The PSoC Programmer root installation folder also includes documentation on how to use the
programming interface:
[Install path]\Cypress\Programmer\[Programmer Version]\Documents
2.5

MiniProg3 LEDs

MiniProg3 has five indicator LEDs that, when lit, indicate the following:
Upper Left - Busy (Red): An operation (such as programming or debugging) is in progress.
Lower Left - Status (Green): The device is enumerated on the USB bus. When flashing, this
LED indicates that MiniProg3 has received USB traffic.
Upper Right - Target Power (Red): MiniProg3 is supplying power to the target connectors. This
LED does not light up if power to target connectors is supplied by a source other than MiniProg3.
Lower Right - Aux (Yellow): Reserved for future use.
Middle - No Label (Yellow): Flashes briefly during the initial configuration of the device. If it stays
lit, this LED indicates that a configuration error has occurred. If this happens, disconnect the
MiniProg3 from the USB port and then reconnect it.
CY8CKIT-002 MiniProg3 User Guide, Doc. # 001-59350 Rev. *E
Installing MiniProg3
13