AERMEC WLRC40 Manual del usuario - Página 4

Navegue en línea o descargue pdf Manual del usuario para Control Panel AERMEC WLRC40. AERMEC WLRC40 20 páginas.

Imprimir página

SYNCHRONISING THE REMOTE CONTROL WITH

THE INDOOR UNIT:

When the unit is in standby, stand no more than

2m away then press and hold the

3 seconds. The remote control and the unit will

be automatically synchronised. If the operation

is successful, the unit will emit 3 beeps; if it fails,

there will be no beep and you must repeat the

operation.

Frequency band(s) that the radio equipment

works in: 2400 MHz-2483.5 MHz

Maximum radiofrequency power transmitted in

the frequency bands that the radio equipment

works in: 13 dBm

REMOTE CONTROL

• Some of the buttons of the remote control are not used

for this air conditioner, and are therefore not described in

these instructions. The pressing of these buttons will not

affect the operation of the air conditioner.

• Check there are no obstructions between the receiver and

the remote control.

• The maximum distance between the IR receiver and the

remote control for ensuring a good signal is 8 metres.

• Position the remote control at least 1 metre away from TVs,

radios, stereos, etc.;there may be some audio and video

interference.

• Do not drop or throw the remote control.

• Do not let liquids enter the remote control, and do not

leave it in direct sunlight or in hot places.

• When the remote control sends a signal, the symbol

appears on the display and the indoor unit receiver emits a

sound to confirm reception of the signal.

Index Function of the button:

Switches the unit on or off

Increases or decreases the value of the active function:

• Temperature

• Time

• ON timer

• OFF timer

Activates or deactivates cooling mode

Activates or deactivates heating mode

Sets the ventilation speed

Activates or deactivates the iFEEL function

Sets the operation of the motorised air delivery fin

(vertical swing)

Selects the operating mode

Sets the operation of the motorised air delivery fin

(horizontal swing)

Activates (T-ON) or deactivates (T-OFF) timer mode

Fan

I Feel

Mode

T-ON

Clock

T-OFF

button for

X-Fan

Temp

Light

Sleep

Wifi

WIFI

ON/OFF

MODE

FAN

SWING

I FEEL

SLEEP

HOUR ON OFF

Cool

Fan

T-ON

Light

Sets the time on the system clock

Activates the HEALTH or AIR function

Activates the prolonged ventilation function

The indoor unit display shows the temperature set-point

and the room or outside air temperature

Activates or deactivates the visualisation of information

on the indoor unit display

Activates or deactivates the SLEEP function (this function

is applicable to cooling and heating mode); once

activated, this function will control the unit in order to

maintain an ideal temperature (which is automatically

calculated and cannot be set)

Activates or deactivates the WIFI card

Liquid crystal display

IR transmitter