Cyrus AV5 Instrucciones de uso - Página 4
Navegue en línea o descargue pdf Instrucciones de uso para Amplificador Cyrus AV5. Cyrus AV5 10 páginas.
Imprimir páginaCyrus AV8
Welcome to the world of Cyrus!
Congratulations on your choice of Cyrus Audio-Visual products. Our state-of-
the-art design technology and outstanding quality of manufacture has
won countless awards around the world. We are confident that you will
derive great pleasure from owning a product from one of the most
recognised and respected manufacturers of hi-fi equipment.
Please read these instructions carefully before commencing installation.
They provide full guidance to help you install your Cyrus AV8 safely and
correctly.
Preparations for Installation
Before installing the AV8 check that the following items are included in
the accessory box.
•
Warranty Card (with instruction manual)
•
AC Mains Cable
•
Remote Control Handset
•
2 AAA Batteries
•
2 MC-Bus phono cables
•
Auto set-up Mic with battery
After removing these items, please retain the packaging.
Install the AV8 in a well ventilated location away from sources of high
temperature, dust or humidity. Never stand the AV8 under another unit or
on any surface likely to hamper its cooling or ventilation.
To avoid damage to your system, always ensure that mains power is
disconnected from all system components until installation is complete.
Installation
Key to the rear panel drawing (Fig.1)
1. Input 1 Optical
2. Input 2 Optical
3. Input 3 Digital
4. Input 4 Digital
5. Input 5 Digital
6. Input 6 Digital
7. Input 7 Analogue
8. Input 8 Analogue
Input 9 Tape
9.
Front channel outputs
10.
NOTE: When connecting inputs to the AV8, ensure that only digital audio
sources are connected to 'Digital' inputs.
Connecting Digital Audio Sources to the AV8
The digital audio inputs of the AV8 are compatible with a number of
different digital audio sources. These include-
•
Digital Audio output from a CD player
•
DVD players (see specifications for DVD technical compatibility
details)
•
Digital tape/disc recorders
•
Digital Radio
•
Digital Satellite receivers
Using a suitable Toslink optical or Digital phono interconnect, connect
each digital audio source to one of the inputs 1~6. Make a note of the
input number used for each source as the inputs of the AV8 can be re-
named at the set-up stage.
2
11. Surround channel outputs
12. Centre channel outputs
13. Subwoofer outputs
14. VCR/tape record outputs
15. AC mains inlet
16. Power switch
17. MC-Bus connections
18. Microphone socket
19. Digital output
Connecting Analogue Audio Sources to the AV8
Analogue Inputs 7-9 are available for the connection of analogue audio
sources to the AV8. Inputs 7-9 are intended for use with analogue
program sources which include-
•
Analogue output from CD/DVD/LaserDisc Players
•
Televisions
•
Analogue Satellite Receivers
•
FM Radio tuners
•
Analogue VCRs/Tape recorders
SCART Connectors
Some TVs, Video Recorders and DVD players have 21 pin SCART style
connectors for analogue audio and video input/output. These may be
connected to the AV8 with a suitable SCART/phono interconnect or
adaptor.
Connecting a LaserDisc player to the AV8
The L/R analogue outputs of a LaserDisc player may be connected to an
analogue input of the AV8.
If the LaserDisc player is equipped with a Digital Output this may also be
connected to one of the Digital Inputs.
The AV8 is not equipped to decode the R.F. AC-3 output of a LaserDisc
player. For R.F. AC-3 signals an external demodulator is necessary to
convert the AC-3 signal to be compatible with one of the Digital Audio
inputs. Your dealer should be able to advise on the choice of a suitable
demodulator.
VCR/Tape recording
If VCRs/Tape recorders are connected to one of the analogue inputs,
recordings may also be made from the AV8 VCR/Tape Out sockets.
Connect a suitable phono interconnect from the Tape Output sockets of
the AV8 to the Record inputs of the VCR/Tape Recorder.
NOTE: The Tape output sockets are active for Stereo mode only (not for
Stereo + Sub or any Surround mode).
Connecting Power amplifiers
External power amplifiers are necessary to drive the system speakers.
Both stereo and high power monoblock Cyrus power amplifiers are
available to partner the AV8.
With suitable phono interconnects, connect from the Front 1), Surround
1!, and Centre channel 1@ outputs to the appropriate power amplifiers.
The system loudspeakers may then be connected to each power
amplifier.
NOTE:- Take care to connect each of the AV8 output channels to the
correct power amplifier and loudspeaker.
In normal use, only one of the Centre channel outputs and a single
amplifier channel are connected to the Centre channel speaker.
Optionally, the stereo Centre channel output option of the AV8 may be
used to drive a stereo amplifier to twin centre channel speakers.
Connecting the Front Channels through a Cyrus hi-
fi system
The AV8 can be connected to an existing stereo Cyrus hi-fi system,
sharing the power amplifiers from the stereo system for the Front
Channels. In this case, connect a stereo phono interconnect from the
Front Channel outputs of the AV8 to the AV input sockets of the Cyrus
stereo integrated amplifier or pre-amplifier. For this system to function
correctly both the AV8 and the Cyrus stereo amplifier must be included in
an MC-Bus connection loop (see section 'MC-Bus connection').
NOTE: The MC-Bus systems of the Cyrus III and Cyrus Pre amplifiers are
not compatible with the AV8 and should not be connected through MC-
Bus.
User Instructions
GB
GB