Cyrus CD i Instrucciones de uso - Página 6

Navegue en línea o descargue pdf Instrucciones de uso para Sistema estéreo Cyrus CD i. Cyrus CD i 18 páginas. Hi-fi
También para Cyrus CD i: Instrucciones de uso (15 páginas)

Imprimir página

Cyrus CD i

Connecting to the AC Mains Supply

Connect the socket on the AC Power cable to the AC Power

inlet f on the rear panel of the CD i. Now connect the cable

to a suitable AC power point.

There is no mains power switch on the CD i. To switch off

the mains supply to the CD i remove the plug from the

wall outlet. For this reason, ensure that the plug is easily

accessible when installing the unit.

Connecting to the System Amplifier

Connect a suitable stereo RCA phono interconnect to the

audio output sockets b of the CD i and the corresponding

input of the amplifier or receiver. Amplifier inputs suitable

for this purpose are CD or AUX inputs.

Dual outputs are provided for convenient connection

to multiroom units or for direct connection to tape/disc

recorders etc.

dO NOT connect the CD i to the PHONO input of the amplifier,

as this could damage your amplifier or speakers.

Connecting a Digital amplifier or External

D/A converter

The CD i provides a digital output to connect to a digital

amplifier or D/A converter. Using a digital interconnect,

connect the dIgITAL OPTIcAL c or DIGITAL COAXIAL d

output to the digital input of an amplifier or D/A converter.

The DIGITAL COAXIAL connection is recommended where

this connection is available.

NOTE: The digital output of the CD i is only compatible with

digital inputs. It is not suitable for connection to an analogue

amplifier.

Connecting a Cyrus PSX-R

The Cyrus PSX-R is a high quality regulated power supply, the

use of which will elevate your CD i into a true world-class

state-of-the-art product.

The connector fitted to the umbilical cable from the PSX-R

must be securely connected to the PSX-R socket e on the

rear of the CD i. When correctly fitted, the connector will

latch into the socket.

NOTe: The PSX-R power supply and the CD i will both require

connection to the mains supply.

NOTE: Connection of a PSX-R is detected automatically, so

no internal adjustments are required.

MC-bus System Connection (Optional)

By using the MC-BUS connection on your CD i, a highly

functional integrated system with full remote control may

be set up. This feature is usable if you own a Cyrus amplifier.

Refer to the relevant product handbook for MC-BUS wiring

instructions.

User Instructions