Cyrus PSX-R Instrucciones de uso - Página 5

Navegue en línea o descargue pdf Instrucciones de uso para Fuente de alimentación Cyrus PSX-R. Cyrus PSX-R 8 páginas.
También para Cyrus PSX-R: Instrucciones de uso (10 páginas)

Imprimir página

1. Connecting the Psx-R to Cyrus Products

Cyrus PSX-R

User Instructions

Welcome to the world of Cyrus!

Congratulations on your choice of Cyrus Hi-fi products. Our state-of-the-art

design technology and outstanding quality of manufacture has won countless

awards around the world. We are confident that you will derive great pleasure

from owning a product from one of the most recognised and respected

manufacturers of hi-fi equipment.

Now is a good time to register your new Cyrus product. Registration takes

only a few minutes, brings the added benefit of a full two year factory warranty

and adds you to our mailing list for future product updates and upgrades. To

Please read these instructions carefully before commencing installation. They

provide full guidance to help you install your PSX-R safely and correctly.

Preparation for Installation

Before installing the Cyrus PSX-R check that the following item is

included in the accessory box.



AC Mains Cable

After removing this, please retain the packaging.

Install the Cyrus PSX-R in a well ventilated location away from sources of

high temperature, dust or humidity. Never stand the Cyrus PSX-R under

another unit or on any surface likely to hamper its cooling or ventilation.

INSTALLATION

Key to the rear panel drawing (Fig.1).

. Power Switch

2. Mains Fuse

3. Power Inlet

4. Output cable

Connecting the PSX-R to Cyrus Products

Only one connection is necessary from the PSX-R power supply to a

Cyrus product. The 5 pin connector

fitted to the umbilical cable must

be securely connected to the socket marked PSX-R on the rear of the

partnering Cyrus product. When correctly fitted, the connector will latch

into place in the socket. Note that when a PSX-R is in use, both the PSX-

R power supply and the Cyrus product will require connection to the

mains supply.

NOTE: When used with a Cyrus III, Cyrus IIIi, Cyrus 7 or Cyrus Power,

the amplifier must be internally changed to accept this external power

supply. This modification should only be carried out by an appointed

Cyrus Dealer. If you decide to use a modified component without a Cyrus

PSX-R, the unit must be re-configured.