Cyrus DAC X+ Instrucciones de uso - Página 11
Navegue en línea o descargue pdf Instrucciones de uso para Media Converter Cyrus DAC X+. Cyrus DAC X+ 17 páginas.
Imprimir página- 1. IMPORTANT! Read before Operating this Equipment
- 2. Power Supply
- 3. Product Service Centres
- 4. User Instructions
- 5. Preparations for Installation
- 6. Model Differences and Upgrades
- 7. User Instruction
- 8. Restoring Factory Settings
- 9. Selecting an Input
- 10. Remote Control Operation
- 11. Troubleshooting Guide
- 12. Warranty
- 13. Audio Performance
Cyrus DAC XP+
OPERATION (DAC XP+)
Key to the front panel drawing (Fig.2):
1. Standby key
2. Standby light
3. Remote eye
4. Display window
5. Level control and setup adjust
Switching On
The mains power to the DAC XP+ should normally be left on unless left
unattended for a long period when the mains power at the wall socket should
be switched off or the product disconnected from the AC supply.
When power is applied, the STANDBY key a is used for power control. The
Standby light b shows red when the DAC XP+ is in Standby and green when
operational.
Selecting an input
Inputs may be selected from the front panel INPUT SELECT buttons i or
with the remote control INPUT SELECT keys. As a new input is selected the
input name/number are displayed briefly. The main display indication for
input/volume can be selected from the three options in the setup menu.
The factory default 'small input' display option will also identify the sample
rate of the selected source and indicate 'Invalid Audio Format' for program
material which the DAC XP+ will not decode (such as multi-channel digital
sound from DVD players or satellite receivers).
Volume and Balance
The level control e of the DAC XP+ performs the dual functions of volume
and balance.
Volume: In normal mode the level control sets the volume in 1dB steps. A
bargraph and a numeric scale at the top of the display window show the
current volume setting. The last used volume setting is stored when the unit is
set to standby.
If the volume is left at an abnormally high volume level before entering
standby, the level will be reduced automatically to a safe level of –15dB for
next use.
Balance: Press the balance control key g to change the mode of the front
panel rotary control e to set Left/Right Balance. The volume display will also
change to show a graphic and numeric display of the balance setting.
Mute
Pressing the MUTE Key h will mute the volume to minimum level without
disturbing the existing volume setting. When muted the display will show that
volume is muted. Move the volume knob up or press the Mute key to fade
back up to the original volume setting.
Programmable Input Sensitivity
You may find an audible difference in level when switching from digital inputs
to one of the two analogue inputs due to the differing outputs of your source
components. The unique calibration memory of the DAC XP+ can be
programmed to match the sensitivity of these inputs with reference to the
digital inputs. Input sensitivity settings are made through the setup menu.
Refer to the section 'Setting up the DAC XP+' for more details.
6. Setup select
7. Channel balance select
8. Mute
9. Input select
9
User Instructions