BluePoint Fasteners GT-100L Manual de seguridad y funcionamiento - Página 10

Navegue en línea o descargue pdf Manual de seguridad y funcionamiento para Pistola de clavos BluePoint Fasteners GT-100L. BluePoint Fasteners GT-100L 13 páginas. Gas concrete nailer

Imprimir página

MAINTENANCE

NOTE:

■ The information contained in this Manualis designed

to assist you in the safe maintenance of theNailer.

■ Some illustrations in this Manual may show details

or attachments that differ from those on your own

Nailer.

MAINTENANCE AND INSPECTION

Read section titled "SAFETY".

DANGER

■ Never use and test in presence

of flammable liquids or gases.

■ Keep away from ignitionsource.

■ No smoking.

WARNING

Remove fuel cell, battery and all nails fromNailer

when:

Daily cleaning;

Maintenance and Inspection;

Clearing a jam.

1. Daily cleaning

Must regularly clean nailer, remove the internal

accumulation of smeary, carbon and dust, to

ensure the normal operation and to extend

nailer's working life. Please use dealer

designated cleaner (00091800).

Follow the attached Gas Concrete Nailer

Cleaning Guide - a steps and methods to clean

the nailer.

The nailer cleaning intervals depend on the

nailer operating environment and the firing

quantity per week of nails. If using in a dirty

environment and firing large quantity per week,

nailer cleaning intervals will be shorter.

Below is the cleaning time intervals form for your

reference. Depending on the usage, the cleaning

interval may be shortened or extended.

Cleaning time intervals form

Operation Environment

very dirty

dirty

common

clean

1000

2 Week

1 Month

2Month

4Month

2000

2 Week

1 Month

2Month

3Month

Firing quantity

4000

2 Week

1 Month

1.5Month 1.5 Month

per week

6000

2 Week

1 Month

8000

2 Week

1 Month

Note

After completion of cleaning, lubricate the

Nailer with with oil (00091600) as shown in

the attached "Gas Concrete Nailer Cleaning

Guide".

If you have any questions about of the cleaning

operating procedures and methods, please contact

a dealer or an authorized service center.

2. Inspecting the magazine

REMOVE FUEL CELL and BATTERY.

①

Clean the magazine.

②

Remove paper chips or wooden chips which

may have accumulated in the magazine.

Lubricate it with dealer designated lubricant oil.

③

Cloth

CAUTION

Check that the nail feeder slides smoothly by

pulling it withfinger.

If not smooth, nails can be driven at an irregular

angle and hurt someone.

3. Storing

DANGER

■

Store Nailer properly with nails,

fuel cell and battery removed .

■ Thefuelcellisanaerosoldispensers

with flammable contents.

■ When not in use, the Nailer, fuel cell and

battery should be stored in tool case and in a

dry place and below temperature 122°F (50°C).

■ Store indoors at temperature 41°F (5°C) ～77°

F （25°C）.

■ When not in use for an extended period, apply a

thin coat of the lubricant to the steel parts to avoid

rust.

■ Do not store the Nailer fuel cell and battery in a

very cold weather environment.

■ When not in use, the Nailer, fuel cell and battery

should be stored in a warm and dry place.

■ Keep it out of reach of children.

4. WARNING LABEL

Change the WARNING LABEL if missingordamaged.

A new WARNING LABEL is available from a

dealer authorized service center.

5. Maintenance chart

ACTION

WHY

HOW

Clean magazine and

To prevent a jam.

Daily cleaning.

feeder mechanism.

Keep firing head

To promote operator

Daily cleaning.

working properly.

safety and efficient

Nailer operation.

Make sure all screws

Periodical

To avoid damage to

are tightened.

inspection.

Nailer and to ensure

safety.

6. Operator troubleshooting

See page 18.

CAUTION

Repair, modification and inspection of The

Power Tools must be carried out together with

the replacement parts listed by a dealer

Authorized Service Center.

In the operation and maintenance of power tools,

the safety regulations and standards prescribed

in each country must be observed.

MODIFICATIONS:

The Power Tools are constantly being improved

and modified to incorporate the latest technological

advancements.

Accordingly, some parts (i.e. code numbers and/or

design) may be changed without prior notice.

SERVICE AND REPAIRS

WARNING

■ Only service personnel trained by dealer,

distributor or employer shall repair the Nailer.

■ Use only parts supplied or recommended by

dealer for repair.

All quality Nailers will eventually require servicing

or replacement of parts because of wear from normal

use.

NOTE

Specifications are subject to change without any

obligation on the part of dealer.