Askey Singtel RT5703W Manual de instalación rápida - Página 2
Navegue en línea o descargue pdf Manual de instalación rápida para Router inalámbrico Askey Singtel RT5703W. Askey Singtel RT5703W 2 páginas. Wi-fi 6 router
Imprimir página
Installing your Router
There are 2 different set-ups in a Singtel Fibre Broadband Home.
Please check your equipment name to confirm the type of set up.
1.
If you are using Optical Network Terminal, please
set up your Wi-Fi 6 Router as per the below diagram.
Fibre
Optical Network Terminal (ONT)
Termination Point
Singtel TV Set-Top Box
Wi-Fi 6 Router
2.
If you are using Optical Network Router, please
set up your Wi-Fi 6 Router as per the below diagram.
Singtel TV Set-Top Box
Fibre
Optical Network Router (ONR)
Termination Point
Wi-Fi 6 Router
Installing your Router
1.
Insert the Power Adapter into the Wi-Fi Router's
Power Port and plug it into the power outlet.
2.
Connect one end of the Ethernet cable to the LAN
1 port on the ONT or ONR and the other to the
WAN port of the Router.
3.
Power up the Router and wait for the internet LED
to light up.
4.
Connect your computer or mobile device to the Router
via Wi-Fi using the Username and Password printed on
the device label or use the ethernet cable to connect
your computer to the Router's LAN port.
Optimal Placement
1.
Router should be placed at a central location
within the home, and preferably unobstructed.
2.
For optimal connection to eliminate Wi-Fi dead
spots, consider adding Singtel Wi-Fi 6 Mesh
Extender to the home network. Speak to a Singtel
representative to learn more.
Mesh
Extender
Mesh
(Optional)
Extender
(Optional)
Router
How to Configure
your Wi-Fi settings:
Scan here for
detailed instructions.
Troubleshooting Steps if you encounter
connectivity issues
1.
Turn off and turn on your Wi-Fi on your handphone
or device to reset the Wi-Fi connection.
2.
If issue persists, reboot the router.
LED Indicator
LED
LED behaviour
Device status
White ON
Router device is ready
Red ON
System failure
Power
Red Flashing
Router is booting up
Off
Power off
White/Red alt. Flashing
Firmware upgrade
White Flashing
Factory Reset
White ON
WAN connection is functioning OK
White Flashing
Obtaining IP address
Internet
Red ON
Internet connection failure
Off
No internet link
White ON
Ethernet connection established
LAN
Off
No LAN connection on the port
White ON
Mesh Network Connection
Mesh
Off
No mesh connectivity
White Flashing
Mesh Pairing