Ambery LCDT7 Manual de instrucciones - Página 12
Navegue en línea o descargue pdf Manual de instrucciones para Media Converter Ambery LCDT7. Ambery LCDT7 19 páginas. Analog video to dvi hdmi converter scaler external cable tv tuner full hdmi/dvi 1080p / 1920x1200 output
Imprimir página( 1 )
MTS Audio:
the current cable TV channel. This audio feature is optional and works only if that
particular CATV channel can support SAP or MTS.
( 2 )
Power: Press this button to be in video mode so users can watch TV or video on the
HDMI display. Press this button for another time, the unit will be in "STANDBY" mode
which will pass the HDMI or DVI input from the computer signal to the display for
loop-through and no video conversion made.
( 3 )
Turn off audio from video. Push this button for another time or simply press VOL+/-
Mute:
key to turn the audio back on again.
( 4 ) Input:
Press this button to switch between different A/V input sources connected to this
unit. The input selection will be in sequential order:TV > AV > YpbPr > HDMI > TV...
( 5 )
Fast switch to TV Input instantly. When pressing this key, this unit will switch to coax
TV:
cable TV input mode right away for watching cable TV.
( 6 )
Fast switch to HDMI Input instantly. When pressing this key, this unit will switch to
HDMI:
HDMI input mode right away.
Only valid under MENU operation and PIP function.
( 7 )
SELECT:
( 8 )
Volume UP/Down:
( 9 )
Channel UP/Down:
This function is only valid under the TV mode.
( 10 )
Configures all the setting-related controls and functions.
MENU:
( 11 )
Press to exit the OSD operation menu after all settings done.
EXIT:
( 12 )
Numeric key 0~9:
NOTE: For TV channel number above 100, please input the 3 digits of the
desired cable tv channel number accordingly.
( 13 )
Favorite channel scan. Further information will be at P.17
FC SCAN:
Favorite channel memory. Further information will be at P.17
( 14 )
FC MEMO:
Return to the previous viewed TV channel.
( 15 )
RCL:
( 16 )
Press this button to show the system information like channel number, current input
OSD:
mode and output resolution information. There will a pop-up window in the upper-left side
on your monitor screen to show all these system info.
( 17 )
Press this button to activate the Picture-In-Picture function. If you want to have PIP
PIP:
window inserted to the main video screen, the main video screen needs to be HDMI
input or component YPbPr input while the PIP window will be either TV or
composite video AV input. When in PIP window, users can press the "INPUT" button on
the remote controller to choose input source to be displayed in the PIP window. There are
2 modes for PIP window sizes, 1/4 and 1/16 of the screen size. To adjust the location
of PIP window on the screen, press
adjust the position of PIP screen.
NOTE:
PIP function will be available at either one of DVI output resolution of 1920X1200
, 1600X1200,1680X1050, 1440X900, 1366x768, 1280X1024, 1024X768,800X600.
Channel selection is done via by the "CH+" or "CH-" key when in PIP mode.
Press "SELECT" key to choose the audio source for main or PIP window when in PIP
mode.
Select the second-language program(SAP) or stereo audio if available for
Press "◄"or"►" to adjust the volume.
Press "▲" or "▼" to select the cable channel
You can direct press the number key to select the channel.
▲
▼
◄
► from the remote controller to
12