Egardia CAM-03 Manual de instrucciones de instalación - Página 7

Navegue en línea o descargue pdf Manual de instrucciones de instalación para Cámara de seguridad Egardia CAM-03. Egardia CAM-03 9 páginas.

To activate the camera, you have to accept the

service fee and the terms and conditions at the

bottom of the page. With this subscription you can

connect up to 4 cameras.

STEP 4: TEST WIRELESS CAMERA

Perform this step only if you want to use the

camera wirelessly.

1. Disconnect the Ethernet cable from the camera.

2. Turn the power off by disconnecting the power

plug from the power mains. Wait 20 seconds.

3. Put the power plug back into the power mains.

The camera now operates wirelessly.

The images from your camera can be viewed in

your personal Egardia account on the "Cameras"

page. After registration of the camera it may take

up to 2 minutes before images appear.

Congratulations! The installation is now completed.

Caution! If after 3 minutes still no picture appears,

unplug the camera from the power mains. Connect

the Ethernet cable to the camera and then plug the

camera back into the power mains. Now click on

the button "Settings" again and enter the correct

settings for the wireless network again.

Important recommendation

Recordings are automatically stored for 30 days.

For longer storage please check the checkbox next

to the recording on the camera page.