Ambi-Rad LCSA Series Información - Página 3
Navegue en línea o descargue pdf Información para Calentador de gas Ambi-Rad LCSA Series. Ambi-Rad LCSA Series 4 páginas. Room sealed gas fired unit heaters
Imprimir páginaInstallation
Units may be suspended or alternatively
mounted on a suitable non-combustible
support. Four integral suspension points
complete with an M10 female thread are
provided to each heater.
The balanced flue terminal provides both
the combustion air inlet and flue outlet
from a single building penetration. The
terminals are ordered separately from the
heaters to suit either a wall or roof outlet.
Additional flue and combustion air pipes may
be added, up to a maximum of nine metres of
flue pipe, plus nine metres of combustion air
pipe. (This reduces by 1.5 metres for every
90° bend fitted.)
To comply with CE approvals, balanced flue
appliances must be used with the
manufacturer's balanced flue system.
The units are also certified for fan assisted
flue installations, where the combustion air
is to be drawn from within the heated
space; an alternative wall or roof terminal is
required for this application.
A single phase electrical supply is required
to each unit. This supply should not be
switched off except for maintenance.
Units must not be installed in atmospheres
containing highly flammable or explosive
vapours, combustible dust, halogenated
hydrocarbons or chlorinated vapours.
They are also unsuitable for areas where
contaminants may affect electrical motors
or connections.
Ease of Maintenance
All controls are housed behind a hinged
service door situated on the right hand side
when viewed from the front.
Certification
Units are designed and tested in
accordance with current European
CE Standards.
Applications
•
Factories
•
Greenhouses
•
Warehouses
•
Workshops
Balanced flue wall outlet (type C12) eliminates
expensive roof opening and flashing
Combustion air through wall, flue outlet
through the roof (type C52)
Heater positions and flue arrangements are indicative.
For heater and flue clearances please refer to the manufacturer's guidelines.
ECA
™
This symbol verifies that the product was
independently assessed and qualifies for
the ECA scheme, an upfront tax relief
enabling businesses that invest in
energy-saving equipment to claim 100%
first-year capital allowances against their
taxable profits.
Balanced flue roof outlet (type C32)
Separate combustion air and flue pipes
(type C12) for applications where wall thickness
exceeds 350mm. Flue and air intake to be offset