Blueshape PWS2 Manual de instrucciones - Página 6

Navegue en línea o descargue pdf Manual de instrucciones para Cargador de batería Blueshape PWS2. Blueshape PWS2 12 páginas. Power station for v-lock lithium ion batteries only

Imprimir página

Introduction

The BLUESHAPE Power Station concept is a convenient system to

integrate the power of multiple V-lock batteries into a unique source

that can be tapped anywhere, anytime as a simultaneous dual DC

voltage output.

Depending on which batteries are installed, the twin PWS2 system

can supply power of up to 280W out with 2 x BV HD battery models.

The internal electronics are highly efficient operating at not less than

91% even when delivering full loads. Such efficiency permits the

PWS2 to remain cool even after hours of continuous operation. This

feature ensures a safe and prolonged system reliability and lifetime.

The batteries on channels 1-2 are hot-swappable and enable the

unit to provide uninterrupted power even when a battery becomes

empty. The user will just need to monitor the capacity decrease of

the batteries through the LED display for the respective channel and

replace as necessary without needing to switch of the unit.

Power is available SIMULTANEOUSLY from the XLR outlets:

1 x 3 pin female XLR for 28V/ 280W max output (10A)

1 x 4 pin XLR for 14V/140W max output (10A)

It is highly recommended the use the HD models of the

BLUESHAPE battery range since these are able to deliver up to

12A discharge.

The display on the PWS2 will only show each battery's contribution

in terms of current draw to the total load being powered. An

indication of the remaining capacity of the batteries in use can only

be obtained by activating the LED gas gauges on the batteries

themselves.

Properties of the PWS2

Powerful 28V, 10A and 14V, 10A continuous output capability

Elegant but rugged and light design. Ideal for indoor and

outdoor use (but not in humid or wet conditions).

Sophisticated internal electronics with highly efficient DC-DC

converters and the acclaimed BLUESHAPE 'QUICKCHANGER'

technology feature on all 2 channels for hot swapping of

batteries.

Can operate with as little as one battery on board (though not

recommended since the unit will not be able to reach its full

performance capabilities.

Accurate data display obtained by the direct dialogue between

unit and the batteries (BLUESHAPE BV only)