Blueshape PWS4-48 Manual de instrucciones - Página 6

Navegue en línea o descargue pdf Manual de instrucciones para Cargador de batería Blueshape PWS4-48. Blueshape PWS4-48 12 páginas. Power station

Introduction

The BLUESHAPE Power Station concept is a convenient system to

integrate the power of multiple V-lock batteries into a unique source

that can be tapped anywhere, anytime as a simultaneous dual DC

voltage output.

Depending on which batteries are installed, the quad PWS4-48

system can supply power as follows:

Up to 560W out with 4 x BV HD models

Up to 490 W out with 4 x BV standard models

The internal electronics are highly efficient operating at not less than

92% even when delivering full loads. Such efficiency permits the

PWS4-48 to remain cool even after hours of continuous operation.

This feature ensures a safe and prolonged system reliability and

lifetime.

The batteries on channels 1-4 are hot-swappable and enable the

unit to provide uninterrupted power even when a battery becomes

empty. The user will just need to monitor the capacity decrease of

the batteries through the LCD display provided and replace as

necessary without needing to switch of the unit.

Power is available SIMULTANEOUSLY from 4 x XLRs:

2 x 3 pin female XLRs for 48V/ 560W max output (11,6A)

2 x 4 pin XLRs for 14V 280W max output (20A)

The display on the PWS4-48 will show each battery's individual

state of charge and the total real time power being generated by the

unit. This display makes it therefore, very easy to monitor the unit

during operation and understand what output, it is delivering.

Properties of the PWS4-48

Powerful 48V, 11,6A and 14V, 20A continuous output capability

Elegant but rugged design. Ideal for indoor and outdoor use

(but not in humid or wet conditions).

Sophisticated internal electronics with highly efficient DC-DC

converters and the acclaimed BLUESHAPE 'QUICKCHANGER'

technology feature on all 4 channels for hot swapping of

batteries.

Can operate with as little as one battery on board (though not

recommended since the unit will not be able to reach its full

performance capabilities.

Accurate data display obtained by the direct dialogue between

unit and the batteries (BLUESHAPE BV only)

Data communication outlet (useful for firmware upgrade/ testing

and calibration purposes at factory or even for future user

software applications)