ambiance 020806 Instrucciones de instalación y seguridad - Página 2

Navegue en línea o descargue pdf Instrucciones de instalación y seguridad para Equipos de iluminación ambiance 020806. ambiance 020806 2 páginas.

Imprimir página
ATTACH TRACK HEAD TO RAIL (Fig. 2)
1. Install glass over threaded socket assembly and secure in
place with retaining ring.
2. Remove cap from rail adapter on track head.
3. Align contacts on track head to conductors on rail.
4. Install fixture to rail by closing adapter over rail. (see fig. 2)
5. Install cap over top of rail adapter and secure cap set screw.
6. Tighten ground set screw on adapter so it sits in groove of rail.
7. Install lamp and thread glass enclosure onto socket
(see fig. 3).
FI XT-INST.
TRACK HEAD INSTALLATION
CORRECT
CORRECT
GROUND
SET
SCREW
MRC 16
MRC 16
VERSION
VERSION
REFLECTOR USED TO ADJUST DIRECTIONAL BEAM SPREAD
GLASS
SHIELD
MRC 16
MRC 16
MRC 16
T4
VERSION
VERSION
T4
VERSION
VERSION
VERSION
FIGURE 3
T4
T4
T4
VERSION
VERSION
VERSION
FI XT-INST.
FI XT-INST.
INCORRECT
IN CORRECT
IN CORRECT
GROUND
SET
SCREW
CAP SET
SCREW
FIGURE 5
LAMP
SUPPLIED
LR-023
SOCKET ASSEMBLY
REFLECTOR
(OPTIONAL)
(OPTIONAL)
ADJUST REFLECTOR
BACK & FORTH FOR
VARIOUS BEAM
DIAMETERS OR USE
WITH OUT REFLECTOR
FOR A GENERAL LIGHT
SOURCE
*
NOT SUPPLIED