ambiance OUTLANDER 15 Manual de inicio rápido - Página 5

Navegue en línea o descargue pdf Manual de inicio rápido para Estufa de leña ambiance OUTLANDER 15. ambiance OUTLANDER 15 7 páginas.

MODEL: OUTLANDER 15

Optional Ash Drawer Kit (For units with legs)

Provisions have been made on the appliance to install an optional ash drawer kit.

1. If the appliance has been previously operated, the appliance must be cold

and the ashes must be removed in order to access the ash plug.

note:

Place the ash drawer from the kit underneath the appliance to catch

falling ashes during the installation.

2. From the underside of the appliance, remove the nuts that secures the

heat shield and the ash opening cover plate.

3. Remove the small light weight brick that is covering the ash opening, and

discard. It is important that the area around the ash opening be cleaned

well to ensure that a proper seal is created between the new ash plug and

the ash opening.

4. Once the area surrounding the opening has been cleaned, place the new

ash plug (supplied) over the opening.

5. Carefully remove the knock out from the heat shield by breaking the micro

tabs.

6. Bend out the four bend tabs at a 900 angle from the heat shield.

7. Align the slots in the ash drawer housing with the four bend tabs. Secure

using the four screws supplied.

8. Secure the heat shield and ash drawer housing to the appliance using the

nuts removed in step 2.

9. Slide the ash drawer into the ash housing.

The kit allows for convenient removal of excess ash.

Ambiance® Fireplaces & Grills

EP20LAD

www.ambiancefireplaces.com

OUTLANDER

WOOD COLLECTION