Asko 7003 Manual de uso - Página 11
Navegue en línea o descargue pdf Manual de uso para Secadora Asko 7003. Asko 7003 13 páginas. Asko 7003 tumbler dryer product's manual
También para Asko 7003: Manual de uso (12 páginas)
Imprimir página
Air venting
Fit the alr evacuation as follows:
» Push the hase onto the stub pipe and
Fit the cover to the hole where the
hose was previously fitted.
fasten with the plastic band.
» Remove the cover as necessary.
+ Insert the stub pipe with the hose into
the hole.
- Fit the cover to the open hole.
Electrical
installation
Electrical installation must be
carried out by a skilled electrician.
As supplied, the machine is
arranged for single-phase.
exhaust fitting or to a discharge
through the wall.
Secure the hose joint to the outlet
stub on the machine.
Run the hose with as few bends
Connection as
extended to a maximum of 8.75
yards of 4" diameter hose.
Make any bends as gentle as
possible. A maximum of four 90°
bends may be fitted in the hose.
The more bends and the longer
the hose, the less will be the
amount of air passing through the
machine.
if more than 8.75 yards of hose is
creased.
|
elie
Fit the
ventilation
grille to
the inside
or outside
of the wall
fuse required.
Ventilation
grille
If the hose is taken to a wall
outlet, a ventilation grille
should be fitted to prevent
reverse flow of cold air.