Asko 7003 Manual de uso - Página 5

Navegue en línea o descargue pdf Manual de uso para Secadora Asko 7003. Asko 7003 13 páginas. Asko 7003 tumbler dryer product's manual
También para Asko 7003: Manual de uso (12 páginas)

Imprimir página

If you want to check how

When the dryer has stopped:

dry washing is:

Remove the washing

Open the door.

Clean the lint filter

The drum stops automatically

Turn off the power at the

and will not restart until you

close the door and press

the Start pushbutton.

jae

The dryrashing that aS ee two

when pe proga yryer stOP°

prics:

| If the machine

does not work

The machine will not start

Check that:

The front door is properly closed.

The main On/Off pushbutton is

pressed in.

e The electric plug is firmly inserted in

its socket (if the machine is not

permanently wired in).

e All fuses are intact.

NOTE!

If the machine still fails to start, it is

probable that the overheating cutout

has operated. It switches off the

tumbler if the temperature is too high.

For example if dust has blocked the

lint filter. Clean the filter and reset the

overheating protection switch by

pressing the rubber disc on the back

of the machine.

filter holder

The machine starts, but

will not continue to run

If the machine starts when the Start

button is pressed, but stops as soon

as the button is released, it indicates

that the overheating cutout has

operated. Clean the lint filter and

allow the machine to cool down.

Excessive drying times

Check that the lint filter is not block-

Note!

Clean lint collecting near the

ed. Do not overload the dryer. Items

tumble dryer as it can be sucked

to be tumble-dried must first have

into the air intake.

been spin-dried, preferably at 800

r/min or more.

signals

ready

n used

main On/Off pushbutton

switch

'Cleaning

the lint filter

The lint filter must be cleaned after

each time the machine has been

used. If this is not done, drying

performance will suffer, as insuffi-

cient air will pass through the drum.

The machine may also overheat: this

will cause it to stop automatically.

Clean the filter as follows:

@ Grasp the filter holder by the two

holes near the center and pull it

off the peg on which it is

supported in the front door.

and brush away the lint in it by

hand.

NOTE:

Wear and tear of fabrics in a

tumble dryer is insignificant.

The lint caught in the lint

filter is dust and fiber

residue that has been

formed when the garments

have been used.

and refit the holder in position on

the peg in the door.

Other user service

About once a year, remove the

flexible exhaust air hose and clean it

and the outlet from the machine.