D&K Minikote Manual del usuario - Página 12

Navegue en línea o descargue pdf Manual del usuario para Laminadora D&K Minikote. D&K Minikote 17 páginas.

Note

Note: As the diameter of the lm roll decreases, tension should be reduced.

To increase tension, turn the adjusting knob clockwise. To decrease tension, turn the knob counterclock-

wise. If the tension is not equal top and bottom, the laminated product will curl. If the material curls up

up as

it comes out of the machine, the top roll is probably tighter than the bottom. If it curls down

down, the bottom

roll is probably tighter.

Note

Note: Make sure the black disks are at against the sidepanel. They should be rotating, both top and bot-

tom, while lm is feeding.

V. Maintaining the Minikote

A. Care and Cleaning

In the normal course of operating the D&K Minikote, dirt and adhesive will accumulate on the heat shoes

and rubber rollers (Laminating produces static electricity which attracts airborne dust and dirt). Regular

inspection and cleaning will assure that this does not become a problem.

Never

Never use hard, sharp, or abrasive items to clean the heat shoes. The shoes are coated with a non-stick

surface that could easily be damaged. Likewise, do not use sharp metallic objects or steel wool to clean

the rubber rollers. Any scratches, indentations, or marks left on the rollers will appear on the laminated

product.

To clean the shoes and rollers, use a clean, lint-free cloth. Some suggested solvents are rubbing

alcohol(isopropyl), ngernail polish remover(with acetone), and Goof-Off® spray.

Laminator.com