Ambient F009RT/WT Manual del usuario - Página 10

Navegue en línea o descargue pdf Manual del usuario para Estación meteorológica Ambient F009RT/WT. Ambient F009RT/WT 14 páginas.

Problem

Temperature sensor reads too high in the

day time.

Indoor and Outdoor Temperature do not

agree

Indoor and Outdoor Humidity do not

agree

Display console contrast is weak

Outdoor color does not change as

expected.

Rain gauge reports rain when it is not

raining

Wind speed appears low

Solution

through solid metal (acts as an RF shield), or earth

barrier (down a hill).

Move the display console around electrical noise

generating devices, such as computers, TVs and other

wireless transmitters or receivers.

Move the remote sensor to a higher location. Move the

remote sensor to a closer location.

Make sure the thermo-hygrometer is mounted in a

shaded area. The pre preferred location is a north facing

wall because it is in the shade most of the day.

Allow up to one hour for the sensors to stabilize due to

signal filtering. The indoor and outdoor temperature

sensors should agree within 2 °F (the sensor accuracy is

± 1 °F).

Use the calibration feature to match the indoor and

outdoor temperature to a known source.

Allow up to one hour for the sensors to stabilize due to

signal filtering. The indoor and outdoor humidity sensors

should agree within 10 % (the sensor accuracy is ± 5 %).

Use the calibration feature to match the indoor and

outdoor humidity to a known source.

Replace console batteries with a fresh set of batteries.

Make sure the outdoor sensor is assigned to Channel 1.

An unstable mounting solution (sway in the mounting

pole) may result in the tipping bucket incorrectly

incrementing rainfall. Make sure you have a stable

mounting solution. Move the rain gauge from the pole

mount to a flat, stable mount (fixed, flat structure).

Average wind speed may have the appearance of low

wind. Try switching the display to wind gust.