Asko 12605 Manual de uso - Página 11

Navegue en línea o descargue pdf Manual de uso para Lavadora Asko 12605. Asko 12605 13 páginas.

Water supply connection

The water supply connections must be made by

a person having the necessary competence.

Water pressure must be in the range 0.1–1 MPa

(ca 1–10 kp/cm

, 10–100 N/cm

A tap must be fitted in the supply pipe for the

hose.

If a new supply pipe has been installed for the

machine, it should be flushed through thoroughly

in order to remove any particles of dirt which

might otherwise block the strainer in the water

inlet of the machine.

The machine is supplied with the outlet hose

ready fitted. The hose should be hung over a

suitable sink edge or drain pipe at a height of

50–90 cm above the floor: the lower height is

preferable. Make sure that the hose is not

kinked.

NB! If the hose is extended, the internal

diameter of the coupling must not be less

than 15 mm.

Guarantee

For guarantee details, see the

guarantee card.

, 15–142 PSI).

Service

Before calling for service, check to see whether the fault is due

to something that you can put right yourself. See the checklist.

If you do require service, telephone your local ASKO retailer or

the ASKO representative for your country. (See guarantee

card for address and telephone number.)

Shut-off taps

Hot water supply

Cold water supply

50–90 cm

Sink