Ambient Recording ACD 201 Manual - Página 3
Navegue en línea o descargue pdf Manual para Equipos de grabación Ambient Recording ACD 201. Ambient Recording ACD 201 20 páginas.
Imprimir página
1
General information
The new version of the Ambient master slate has various improvements in respect to
previous versions due to experience gathered, and in answer to requests by customers
who have sucessfully used the ACD 101 and ACD 201.
1 . 1
Mechanical improvements
A
A new type of mask for the display to improve readability in sunlight. The mask
is laser cut for each segment and implements a dark background and anti-glare
function. The slate does not need any sun shade.
B
The housing has been strengthened and made larger. No writing extension
is needed.
C
The battery compartment will take up to 9 Penlite cells thus allowing
the use of Nicads
battery is inserted.
D
The writing surfac e is more durable and white .
E
There is an extra timecode in/out socket thus freeing the LEMO interface
socket for checking and setting duties.
F
The new electronics can still be fitted in the small housing preferred
by documentary filmers.
1 . 2
Electrical improvements include
A
Display now very bright but still 9 step brightness control.
B
Timecode generator
slating. Automatic charging of backup battery through separate DC/DC converter.
C
Camera speed check , strobe bars flicker at framerate. When viewed through
camera, a bar stays still or moves if there is a difference between camera speed
and framerate.
D
Input and ext timecode framerate identified and displayed.
E
Timecode error displayed in 1/4 Frame steps up to 2 Frames
F
Reader and generator timecode displayed . When slate is opened external
timecode is displayed. When slate is closed the internal generator code is
displayed.
recording live sound with playback.
G
X jam syncing of slate possible . In other words an external 24 frame code
can set a 25 frame slate code. Slate has to be set to the code required. Jamming
from an external source sets the time at the zero frames point. Operators must
know which codes are compatible.
H
Optional internal Telemetry UHF receiver for receiving timecode by radio at
little extra cost.
All former clockit features have been retained and operating modes
have changed as little as possible
which only have 1.2 volts. When using 8 cells a dummy
cannot crash even though batteries go flat during
Display playback Timecode value at slating moment. Useful when