Ambient Recording ACD 201 Manual - Página 7

Navegue en línea o descargue pdf Manual para Equipos de grabación Ambient Recording ACD 201. Ambient Recording ACD 201 20 páginas.

2.1.5 Changing the batteries

Change batteries when the Red LED doubleblinks. The slate's internal Nicad

accumulator has a 10 minute Backup time when the batteries have been

removed. The internal data is not lost during battery change.

2.1.6

The generator Xtal of all clockit units can be "Tuned" to within +- 0.1 ppm of

the Clockit Controller (ACC 101) or to a fixed offset to match another

machine. Full details of this process will be found in the Clockit Controller

manual.

The slate can be used to implement all timecode checking functions required on the

set using the internal clockit generator as a master to check all other timecode

equipment as required. Error checks can be carried out without the slate jamming

from the externally connected timecode.

The following checks can be implemented:

Framerate -------------------

Drop, Nondrop -------------

Error ---------------------------between Slate generator timecode and any

2.2.1 Camera speed check ----

vertical bars flicker at fps

This feature works only when no external TC connected. When viewing the

slate through a camera you will see one vertical stripe. This stripe is

standing still if the camera's speed matches the slates framerate. If the bar is

moving left then the camera is too slow, if the bar is moving to the right then

the camera is running too fast in respect to the set framerate.

Tuning the slate

identification

externally connected timecode up to 2

Frames in _ fr steps.

slate fps