Ambient Technologies RMSC Instrucciones de instalación y funcionamiento - Página 2
Navegue en línea o descargue pdf Instrucciones de instalación y funcionamiento para Mando a distancia Ambient Technologies RMSC. Ambient Technologies RMSC 2 páginas. Manual flame height adjustment remote control
Imprimir página
WARNING: Changes or modifi cations to this unit not
expressly approved by the party responsible for com-
pliance could void the user's authority to operate the
equipment.
Transmitter Thermal Shutdown
1. If transmitter measures a room temperature exceeding 99 de-
grees Fahrenheit, the LCD will display "HI" and the transmitter
will turn off the appliance.
2. Transmitter will not function until the room temperature has
dropped below 99 degree Fahrenheit.
3. If transmitter measures a room temperature less than 40 de-
grees Fahrenheit, the LCD will display "LO" and NO SIGNAL will
be sent to turn on the appliance.
TROUBLESHOOTING
Symptom
Causes
Action
Battery icon on
Low battery
1. Replace batteries.
transmitter LCD is
Change batteries
displayed.
every six months.
LCD display is
Low battery
Check battery instal-
blank.
lation and replace
batteries.
LCD shows a "fun-
Low battery
Press reset button
ny" display.
at back of transmit-
ter.
The receiver does
1. Learning was
1. Perform learning
not respond to
not performed after
every time DIP set-
transmitter.
setting the DIP (Pri-
tings are changed.
vacy) swtich setting
on transmitter.
2. Transmitter de-
2. Move trans-
tects temperatures
mitter to a cooler
exceeding 99°F and
place and wait until
shows "Hi" on LCD.
temperature drops
below 99°F.
3. Distance between
3. Make sure the
the transmitter and
operating distance is
receiver is more
less than 30 feet.
than 30 feet.
NOTE: This equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equip-
ment generates, uses and can radiate radio frequency energy and,
if not installed and used in accordance with instructions, may cause
harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or televi-
sion reception, which can be determined by turning the equipment
off and on, the user is encouraged to try to correct the interference
by one or more of the following measures:
•
Re-orient or relocate the receiving antenna.
•
Increase the separation between the equipment and receiver.
•
Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.
•
Consult the dealer or an experienced radio/TV technician for
help.
20H3180 RMSC.indd 2
20H3180 RMSC.indd 2
WARRANTY
This warranty gives you specifi c legal rights and you may also have
other rights that vary from state to state or province to province.
Answers to any questions regarding our limited warranty may be
obtained by writing our corporate offi ces.
Ambient Technologies warrants each new Ambient Technologies
remote control against any defects that are due to faulty material or
workmanship to the original owner, for a period of fi ve years after
the original date of purchase. This warranty and our liability does not
apply to batteries, nor does it include damage to merchandise or the
remote control resulting from accident, alteration, neglect, misuse,
improper installation or any other failure to follow Ambient Technolo-
gies installation and operating instructions.
Ambient Technologies agrees to repair or replace at its option any
Ambient Technologies remote control under warranty provided it is
returned postage prepaid to our warranty facility in a padded carton
within the warranty period, with proof of the original date of purchase
and a brief description of the malfunction. This limited warranty does
not include the cost of removal or re-installation. All Ambient returns
must have a return authorization number from Ambient Technical
Support.
149 Cleveland Drive
Paris, KY 40361
Technical Support: 800.398.6195
20H3180, Rev 3, 9/14
9/23/2014 9:07:37 PM
9/23/2014 9:07:37 PM