Ambient Weather WS-0802 Manual del usuario - Página 14
Navegue en línea o descargue pdf Manual del usuario para Termómetro Ambient Weather WS-0802. Ambient Weather WS-0802 15 páginas. 8-channel wireless thermometer with min/max display
Imprimir página
Problem
Indoor and outdoor temperature do not
agree
Display console contrast is weak
9. Liability Disclaimer
Please help in the preservation of the environment and return used batteries to an authorized depot.
The electrical and electronic wastes contain hazardous substances. Disposal of electronic waste in
wild country and/or in unauthorized grounds strongly damages the environment.
Reading the "User manual" is highly recommended. The manufacturer and supplier cannot accept any
responsibility for any incorrect readings and any consequences that occur should an inaccurate reading
take place.
This product is designed for use in the home only as indication of weather conditions. This product is
not to be used for medical purposes or for public information.
The specifications of this product may change without prior notice.
This product is not a toy. Keep out of the reach of children.
No part of this manual may be reproduced without written authorization of the manufacturer.
Ambient, LLC WILL NOT ASSUME LIABILITY FOR INCIDENTAL, CONSEQUENTIAL,
PUNITIVE, OR OTHER SIMILAR DAMAGES ASSOCIATED WITH THE OPERATION OR
MALFUNCTION OF THIS PRODUCT.
10. FCC Statement
Statement according to FCC part 15.19:
This device complies with part 15 of the FCC rules. Operation is subject to the following two
conditions:
1. This device may not cause harmful interference.
2. This device must accept any interference received, including interference that may cause
undesired operation.
Statement according to FCC part 15.21:
Modifications not expressly approved by this company could void the user's authority to operate the
equipment.
Statement according to FCC part 15.105:
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates, uses and
Version 1.0
©Copyright 2017, Ambient LLC. All Rights Reserved.
Solution
Allow up to one hour for the sensors to stabilize due to
signal filtering. The indoor and probe temperature sensors
should agree within 4 °F (the sensor accuracy is ± 2 °F).
Use the calibration feature to match the indoor and probe
temperature to a known source.
Replace console batteries with a fresh set of batteries.
Page 14