Ambient Weather WS-8460 Manual del usuario - Página 14
Navegue en línea o descargue pdf Manual del usuario para Reloj despertador Ambient Weather WS-8460. Ambient Weather WS-8460 17 páginas. Clear view projection alarm clock with indoor temperature and color changing outdoor temperature
Imprimir página
5.14 Adding Multiple Wireless Sensors
If you introduce additional sensors into the system, you will need to reset the console.
1. Set the Channel number on the wireless sensor per Figure 2. Power down and up the
sensor after you have changed the channel number for the change to take effect.
2. Resync the console. Reference Section 5.13.
6. Specifications
6.1 Wireless Specifications
Line of sight wireless transmission (in open air): 150 feet
Frequency: 433 MHz
Update Rate: 60 seconds
6.2
Measurement Specifications
The following table provides specifications for the measured parameters.
Measurement
Indoor Temperature
Outdoor Temperature
Barometer
6.2 Power Consumption
Display: 1 x CR2032 Battery
Display: DC 6V, 300mA adaptor
Wireless Transmitter: 2 x AA Alkaline batteries recommended, Lithium e2 Energizer for cold
weather.
7. Troubleshooting Guide
If your question is not answered here, you can contact us as follows:
1. Email Support:
2. Technical Support: 480-346-3380 (M-F 8am to 4pm Arizona Time)
Version 1.0
©Copyright 2016, Ambient LLC. All Rights Reserved.
Range
32 to 113 °F
-4 to 140 °F alkaline
batteries
-22 to 140 °F Lithium
e2 Energizer batteries
540mb to 1100mb
(15.95 inHg to 32.48
inHg)
Altitude Range: -2,291
to 16,413' (-698 to
5000 meters)
Accuracy
± 2 °F
± 2 °F
± 8mb (540 to 969mb)
@ 25 °C
± 5mb (970 to
1030mb) @ 25 °C
± 8mb (1031 to
1100mb) @ 25 °C
Resolution
0.1
0.1
1hPa / 0.01inHg /
0.1mmHg
Page 14