ambiq micro Apollo4 Blue EVB Manual de inicio rápido - Página 7

Navegue en línea o descargue pdf Manual de inicio rápido para Monitor ambiq micro Apollo4 Blue EVB. ambiq micro Apollo4 Blue EVB 20 páginas. Evb display kit
También para ambiq micro Apollo4 Blue EVB: Manual de inicio rápido (18 páginas)

Imprimir página

Reference Documents and Software

The following items, which can be downloaded from the Apollo4 Product Page link on https://ambiq.com/,

may be useful in understanding and using the EVB.

▪ EVB Schematic

▪ Datasheet

▪ Programmer's Guide

▪ Errata List

▪ AmbiqSuite SDK

Quick Start

The EVB Kit comes with the following items:

▪ Apollo4 Evaluation Board (EVB), revision 3

▪ USB Type C cable

▪ Four adhesive-backed rubber feet

▪ Extra jumpers

Caution: The EVB has components loaded on the back of the board. Care should be taken to not damage

these components. The included rubber feet should be applied to the bottom of the board to prevent direct

contact between the components and a desk surface.

The EVB comes with jumpers pre-configured for default operation. Also, it has been pre-programmed with

the Binary Counter example program. To start EVB program execution, connect the USB-C cable from a

USB port on a PC to the J-Link USB connector (J6) on the EVB, and turn on the power switch (SW4). The

blue LED under the power switch should illuminate.Monitor the three LEDs on the bottom of the EVB (D3-

D5). The LEDs should light in a binary count-up pattern, and repeat.

The AmbiqSuite SDK provides many example programs that may be run on the EVB. To run these

examples, download the SDK via the link provided above and select any of the pre-built examples in the

SDK at /boards/apollo4b_bga_evb/examples.

QS-A4-4p1

Apollo4 EVB Quick Start Guide

Page 7

2023 Ambiq Micro, Inc.