Ambir Ambirscan 2.0 Manual del usuario - Página 4

Navegue en línea o descargue pdf Manual del usuario para Escáner Ambir Ambirscan 2.0. Ambir Ambirscan 2.0 9 páginas.

Starting AmbirScan 2.0

1) Before starting AmbirScan 2.0 please make sure the Ambir scanner driver is installed

and the scanner is connected to your computer. Refer to the Quick Start Guide

included with your scanner for instructions.

2) Double-click the AmbirScan 2.0 shortcut icon on your desktop. This will open the

program and display the basic scanning options.

3) Before you can begin scanning you must choose which scanner you want to use.

4) Go to the ―Scanner:‖ pull-down menu and select a scanner. The menu will only show

scanners that are installed on your computer. To add more scanners, you must install

drivers. Refer to the Quick Start Guide included with your scanner.

Note: Calibration is a critical step in setting up your scanner. It allows the image quality

to be "balanced" for your computer and scanner combination. If at any time you

switch the computer you use with your scanner, or change scanners, you will be

required to calibrate again.

1) Select the SCAN button and step-by-step calibration instructions will appear in a

succession of prompts.

2) This calibration process will require the special black and white calibration sheet that

was included with your scanner. When calibrating, make sure the page with the

black bars are facing down and note the direction of the arrows for proper insertion.

3) When the calibration process has been completed successfully, you will see the

message above; otherwise you would need to re-calibrate.