ACR Electronics RLB-41 Manual de soporte del producto - Página 10

Navegue en línea o descargue pdf Manual de soporte del producto para Sistema de seguridad ACR Electronics RLB-41. ACR Electronics RLB-41 20 páginas.

INSTALLING THE BEACON

Step 1: Determine a suitable mounting location

Locate the beacon in a readily accessible location that is protected from outside influences. The location selected must be

sufficiently rigid to support the weight of the total installation.

Hazards to avoid when selecting a mounting location:

- Vibration

- Exposure to the elements, especially sun

- Possibility of impact from hatches, gear or personnel

- Harmful vapors

- Exhaust

- Harsh chemicals (i.e. paint removers)

- Locations that can be obscured by foreign articles on a temporary or permanent basis.

CAUTION: Category I brackets must be mounted free from obstruction, to allow the beacon to automatically float

free from the vessel. The Category I bracket can be mounted on a vertical surface with the beacon antenna pointing

skyward or on a horizontal surface with the beacon facing up. Avoid mounting locations that subject the bracket to

breaking waves. Avoid structures such as dodgers or cabin tops that could trap the beacon upon deployment.

CAUTION: Category II brackets must be mounted in a protected location that is easily accessible. The CAT II

bracket can be mounted on a vertical surface with the beacon antenna pointing skyward or on a horizontal surface with

the beacon facing up. Avoid mounting locations that subject the bracket to breaking waves and locations that do not

provide protection from harmful UV rays.

10 |

P a g e