FlisKits Thing-a-ma-Jig Manuel d'instructions de montage - Page 4

Parcourez en ligne ou téléchargez le pdf Manuel d'instructions de montage pour {nom_de_la_catégorie} FlisKits Thing-a-ma-Jig. FlisKits Thing-a-ma-Jig 8 pages. Flying model rocket

Imprimer la page

NOTE:

The next several figures will show you how to

assemble your "Jig/Tech" Balsa Fin Unit with the 3 fins

provided. This first time through will be PRACTICE (without

glue) so that you can become used to doing it. After you have

practiced these steps, you will repeat them with glue.

ma-FACT: Jig/Tech is just a fancy name we came up with for our fins

with tabs and slots. We think it' s cool ? )

Referring to Figure 9, connect the first two fins together as

shown. The INSET drawing in the lower right shows you

what your fins should look like connected together.

Figure 9

10.

The third fin is rather tricky the first time, but real easy

once you figure it out. Figure 10 shows you how to

connect this third fin to your Fin Unit.

Figure 10

11.

When you are done, your Fin Unit should look like that

shown in Figure 11.

(Thing-a-

12.

That was a good practice! Now that you are familiar with

these steps, you will take your Fin Unit apart and

reassemble it, but with GLUE this time! Figure 12 shows

you how to apply the glue to the glue line on all 3 fins.

Once you have done this, go back and repeat

Steps 9 – 11.

ADULTS may wish to help with these steps.

Steps 13-18 Parachute Assembly

13.

Figure 13 shows you the Parachute unfolded. You need

to cut out the 6-sided parachute as described.

FACT: The Parachute is used to slow the model' s descent after

its flight.)

Figure 11

Figure 12

Figure 13

Thing-a-ma-Jig Instruction Sheet: INS-SP015

(Thing-a-ma-