AMC iLive Manuel de l'utilisateur - Page 15

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} AMC iLive. AMC iLive 16 pages. Uhf wireless system

Problem

Receiver does not show any

operation signs

Distortion or unwanted noise

No RF signal

RF signal available but no audio

signal

Transmitter could not be turned on

Solution

Make sure AC adapter is securely

plugged into electrical outlet and in to

DC input connector on rear panel of

receiver

Remove nearby sources which may

interfere with radio frequency

transmission (CD players, computers,

digital effects, in-ear monitor systems,

etc.)

Change receiver and transmitter to a

different frequency.

Reduce transmitter gain.

Replace transmitter batteries.

If using multiple systems, change one of

active systems frequency.

Adjust the squelch threshold.

Transmission frequency should be the

same as the receiving frequency, or make

sure the transmitter is not out of range.

Check connector to the microphone and

make sure receiver's squelch threshold is

adjusted to low

Replace transmitter batteries