AMC iLive 2 Manuel de l'utilisateur - Page 7

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} AMC iLive 2. AMC iLive 2 16 pages. Wireless microphone system
Également pour AMC iLive 2 : Manuel de l'utilisateur (18 pages)

Imprimer la page

Receiver operation

SYNC BUTTON
Press this button to transmit data from receiver to transmitter in order to synchronize microphone or
body pack transmitter and receiver.
NAVIGATION BUTTONS
These buttons are designed to navigate receivers menu and adjust settings.
SET BUTTON
Short press of this button shows number of current channel for two seconds on LCD screen if channel
frequency are displayed for default and otherwise, shows the channel frequency if channel number are
set for display default. Long press brings menu on the screen, in order to enter the submenu press SET
button one more time. Use navigation buttons to navigate menu or adjust settings.
LCD DISPLAY
Displays the current settings, menu and other information, like RF level, AF level, volume, frequency or
channel, lock status, mute status and which antenna A or B is active at the moment.
IR TRANSMITER
IR transmitter allows synchronize microphone or body pack and receiver by establishing handheld
microphone or body pack radio frequency to the same as the receiver.
POWER SWITCH
Press power switch for 3 seconds to turn on/off the power.
ANTENNA CONNECTOR
This connector designed to connect antenna to the receiver.
XLR AUDIO OUTPUT
Balanced XLR audio output.
MIXED AUDIO OUTPUT
Unbalanced audio output, 6.3mm TS jack connector. Audio signal in this output is mixed from both
receivers.
MAIN POWER CONNECTOR
Connector for DC 12 V – 16 V 1.25A power supply.

Handheld microphone operation

LCD DISPLAY
Displays the current frequency, channel and transmitter's battery level.
IR RECEIVER
IR receiver allows synchronizing microphone and receiver by establishing handheld microphone radio
frequency to the same as set in receiver.
POWER BUTTON
Press power button for 3 seconds to turn on/off the power.
BATTERY HOLDER
Battery holder for two pieces of AA sizes alkaline batteries. Pay attention to battery polarity, wrong
polarity can damage transmitter!
BATTERY COVER
Remove battery cover in order to insert or replays batteries.