amc VIBRO AV CONDITIONER 1000 Manuel de l'utilisateur - Page 3

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} amc VIBRO AV CONDITIONER 1000. amc VIBRO AV CONDITIONER 1000 7 pages. Single channel conditioner icp/iepe

amc VIBRO AV CONDITIONER 1000 Manuel de l'utilisateur

1. Introduction

AV CONDITIONER 1000
in the ICP/IEPE standard.
Thanks to its small size and weight, robust design, very good operational parameters and ease of use, it
is ideally suited for carrying out measurements both in the laboratory and in the field.
The conditioner is equipped with input circuits enabling powering up the ICP/IEPE sensor, while
maintaining wide frequency response, very good linearity and low noise. Is also equipped with an LED
indicating open or short circuit in the sensor loop.
The device can be powered up either by an adapter or an internal battery pack 4xAAA.

2. Technical data

Parameters
number of channels
input type
input / output connector
input impedance
output impedance
gain
gain error
gain drift
output range
offset
SNR
frequency range (- 3 dB)
power supply
batteries
dimensions
weight
operating temperature
storage temperature
*) optional 500 kHz
3
(AVC 1000) is a universal conditioner designed to interface with sensors made
1
ICP/IEPE 24V DC / 2,4 mA
BNC / BNC
100 kΩ
120 Ω
1x (0 dB)
< 0,1%
< 5 ppm /°C
±10V
< 10 mV
> 90 dB
0,16 Hz – 100 kHz *
9V DC/100 mA
4 x AAA
60 x 100 x 30 mm
225 g
0°C - 60°C
-10°C – 70 °C (without batteries)
AV CONDITIONER 1000 / ©AMC VIBRO Sp. z o.o.