AMCOL 3500-ETC Manuel de l'opérateur - Page 3

Parcourez en ligne ou téléchargez le pdf Manuel de l'opérateur pour {nom_de_la_catégorie} AMCOL 3500-ETC. AMCOL 3500-ETC 12 pages. Electronic timing controller
Également pour AMCOL 3500-ETC : Description technique (8 pages)

Imprimer la page

1 Introduction

The AMCOL 3500E Electrostatic

Powder Application System is

designed to automatically

lubricate aluminum billets using

410 BNP EJECTEZE with press

guard and other safety

equipment actively in place.

Burns, physical demands, and

other more serious injuries can

occur with manual lubrication.

This design is universal as it can

fit most billet loading conveyors

(horizontal, vertical, and

overhead). This system is

traditionally timed and

actuated through the press PLC

and runs in harmony with the

production process.

In many situations, electronic control of the 3500 requires modifying the

programming of the press PLC and wiring in multiple connections to correctly

control the system. This can be both challenging and inefficient to do for each

system. To solve this problem, AMCOL has created a simple package to

effectively control a 3500E system with a single PLC output. If used properly, the

3500-ETC will allow for consistent, repeatable coatings with settings that can be

easily seen and changed where necessary.

P a g e | 2

3500-ETC Operator's Manual