Amcor A D100Y Manuel d'instruction - Page 9

Parcourez en ligne ou téléchargez le pdf Manuel d'instruction pour {nom_de_la_catégorie} Amcor A D100Y. Amcor A D100Y 13 pages. Home dehumidifier

Imprimer la page

STORAgE

If you do not wish to use the unit for an extended period of time please:

• Turn the unit off, unplug it and tidy AC cord.

• Completely empty the water tank and wipe it clean, allow it to dry thoroughly

before replacing it.

• Cover the unit and store it away from direct sunlight or other sources of heat.

TROUbLE SHOOTiNg

Never try to repair or dismantle the dehumidifier yourself. Incompetent repairs result in loss of warranty

and can endanger both the user and property..

Problem

The dehumidifier does

not function.

The dehumidifier does

not seem to perform.

The unit seems to do

little.

The unit is too noisy.

The unit is leaking.

To correct problems that have not been described in the table and/or if the recommended solutions fail

to solve the problem, contact an authorised service centre.

Disposal

Waste electrical and electronic products must not be disposed of with household waste. Please

refer to the retailer from whom you purchased this item for disposal instructions.

Batteries and packaging materials should be recycled using local facilities.

Cause

Is the unit plugged in?

Is the house electricity on?

Is the room temperature below

5 ° C or above 35 ° C?

Is the water tank full indicator

lit?

Is the filter dusty, contaminated

Is the air intake or outlet

blocked?

Is the room humidity already

quite low?

Are too many windows or doors

open?

Is there something in the room

producing lots of humidity?

Solution / Comments

Connect to a functioning mains power

outlet and switch on.

If so, then it is out of the working range of

the unit.

Check the water tank is positioned properly

in the unit and it is not full.

Clean the filter.

Clean the air intake or outlet.

Prove the dehumidifier works by selecting

the "Max" position with the humidistat.

Check whether the unit is sitting on a level

surface.

Make sure the unit is in good shape.

If you are not using continuous drainage,

make sure the rubber plug (at the bottom

of the unit) is in its position.