Floe V1600 PWC Manuel d'instructions de montage - Page 12
Parcourez en ligne ou téléchargez le pdf Manuel d'instructions de montage pour {nom_de_la_catégorie} Floe V1600 PWC. Floe V1600 PWC 12 pages. Anchoring system
Également pour Floe V1600 PWC : Manuel d'instructions de montage (8 pages), Manuel d'instructions de montage (8 pages)
Imprimer la page
IF ADDITIONAL ADJUSTMENT IS REQUIRED, LOOSEN 3/8" NUTS AND SLIDE POCKETS
ON FRAME BEAM WITH ANCHOR ASSEMBLIES UNTIL DESIRED POSITION IS FOUND.
ONCE POSITION IS SET, RE-TORQUE NUTS TO 35 FT-LBS (FIGURE 2.9).
DRIVE ANCHOR ASSEMBLY INTO LAKE BOTTOM USING 1-1/8" 6 POINT SOCKET & 1/2" DRIVE
RATCHET UNTIL COLLAR TOUCHES TOP OF ANCHOR POCKET (FIGURE 2.10).
IMPORTANT NOTE:
ONLY USE A 6
POINT SOCKET.
12 POINT SOCKETS
MAY CAUSE
DAMAGE TO HEX
SHAFT.
6 POINT SOCKET
12 POINT SOCKET
DO NOT USE
2X
FIGURE 2.10
SHEET 12 OF 12
IMPORTANT
IMPACT OR
CORDLESS
ANCHORS.
2X
FIGURE 2.9
DO NOT
USE AN
DRILL TO
INSTALL
LIFT