Floe VSD 10000 Manuel d'instructions de montage - Page 7
Parcourez en ligne ou téléchargez le pdf Manuel d'instructions de montage pour {nom_de_la_catégorie} Floe VSD 10000. Floe VSD 10000 16 pages. Full length pontoon & tri-toon bunks large lifts
Également pour Floe VSD 10000 : Manuel d'instructions de montage (8 pages)
Imprimer la page
ADJUST HEIGHT AND HAND TIGHTEN ONLY (FIGURE 1.6). ATTACH CLAMP WELDMENTS TO CRADLE
BEAM USING (2) 3/8" X 4" BOLTS AND (2) 3/8" NUTS. DO NOT TORQUE (FIGURE 1.7).
FIGURE 1.6
4X
BUNK/CRADLE PAD DISCLAIMER
DUE TO THE LARGE VARIETY OF BOAT HULL DESIGNS, WE STRONGLY RECOMMEND
THAT YOU CONSULT WITH YOUR BOAT'S MANUFACTURER TO ENSURE THAT YOU
ARE SUPPORTING YOUR BOAT PROPERLY TO AVOID ANY POTENTIAL DAMAGE.
NOTE: SEE FIGURE 2.5 FOR GENERAL GUIDELINES ON SETUP
4X
FIGURE 1.7
SHEET 7 OF 16