Floe VSD 8000 Manuel d'instructions de montage - Page 7

Parcourez en ligne ou téléchargez le pdf Manuel d'instructions de montage pour {nom_de_la_catégorie} Floe VSD 8000. Floe VSD 8000 8 pages. Full length pontoon & tri-toon bunks large lifts
Également pour Floe VSD 8000 : Manuel d'instructions pour l'assemblage (12 pages), Manuel d'instructions de montage (8 pages), Manuel d'instructions de montage (16 pages)

POSITION THE (4) CENTER CRADLE PAD ASSEMBLIES, (2) PER CRADLE BEAM, AND (2) OUTER CRADLE PAD

ASSEMBLIES BASED ON THE WIDTH OF THE BOAT. PADS MUST BE POSITIONED SO THAT THEY UTILIZE

THE CHINE OF THE HULL, AS THIS WILL HELP TO KEEP THE CRADLE PAD ASSEMBLIES VERTICAL (FIGURE

2.4 & 2.4A).

UPRIGHTS MAY HAVE TO BE CUT TO ALLOW FULL

TRAVEL OF CRADLE ONCE FINAL PLACEMENT IS

ESTABLISHED.

NOTE:

SHEET 7 OF 8

BUNK/CRADLE

DISCLAIMER

DUE TO THE

LARGE VARIETY

OF BOAT HULL

DESIGNS, WE

STRONGLY

RECOMMEND

THAT YOU

CONSULT WITH

YOUR BOAT'S

MANUFACTURER

TO INSURE

THAT YOU ARE

SUPPORTING

FIGURE 2.4

YOUR BOAT

PROPERLY TO

AVOID ANY

POTENTIAL

DAMAGE.

PAD