Floe SECTIONAL DOCK WEDGE Instructions de montage - Page 3

Parcourez en ligne ou téléchargez le pdf Instructions de montage pour {nom_de_la_catégorie} Floe SECTIONAL DOCK WEDGE. Floe SECTIONAL DOCK WEDGE 4 pages. 510-02150-00;510-02155-00

Imprimer la page

STEP 1

- Attach a Quick Connect to the dock frame. Start by measuring 41"

from the face of the trim on the opposing dock and up 1-3/4" from the

bottom and mark. Drill a 13/32" bolt hole on that mark. The Quick

Connect can be used as a drill guide. Refer to figure 1A for details on

the dimensions. Attach the Quick Connect to the dock frame beam as

shown in figure 1B and attach using a 3/8 x 2" button head bolt and

aluminum nut. Torque to 20 ft/lbs.

3/8 Aluminum Nut

Quick Connect

3/8 x 2" Button Head Bolt

STEP 2

- Attach the second and third Quick Connects to the dock frame. Start

by measuring 3" from the face of the trim and up 1-3/4" from the

bottom and mark. NOTE: THE EXISTING QUICK CONNECT BOLT

HOLE WILL BE AVALIBLE TO USE IN SOME CONFIGURATIONS.

Measure 41" from the face of the dock trim and up 1 3/4" and mark.

Drill the two 13/32" bolt holes on those marks. The Quick Connect can

be used as a drill guide. Refer to figure 2A for details on dimensions.

Attach the Quick Connect on the dock frame beam as shown in figure

2B using a 3/8 x 2" button head bolt and aluminum nut. Torque to 20

ft/lbs.

FIG.

SHEET 3 OF 4

FIG.