Floe 511-00832-00 Manuel d'instructions de montage - Page 5

Parcourez en ligne ou téléchargez le pdf Manuel d'instructions de montage pour {nom_de_la_catégorie} Floe 511-00832-00. Floe 511-00832-00 8 pages.

Imprimer la page
Floe Wireless Systems
Reprogramming Receiver To Transmitter Fob
Reprogramming a Remote Receiver to a Remote Transmitter Fob:
Each transmitter has a unique identity. Each time a Remote Transmitter Fob is operated, it
emits a secure RF signal. The Remote Receiver can learn new signals, thereby allowing the
user to reprogram the Remote Receiver to match a new different Remote Transmitter Fob.
To Prepare a Remote Receiver for Reprogramming, follow this
procedure:
A
From the dock, loosen the bolt
holding the receiver mast,
pull out the mast, and rotate it for
easy access to the Remote Receiver.
Return to the upright position when
Reprogramming is complete.
B
Remove the Antenna (unscrew)
CAUTION
and the two Phillips Head Screws
and save them.
DO NOT Allow Exposed
Circuit Board To Come In
Contact With Metal
C
Remove the base with the Circuit
Board, the floodlight plug, and the
power plug. The power plug (black
cord) must be plugged into the battery
to reprogram the Remote Receiver.
Make sure black O-Ring is around the
plastic base.
5
SHEET 5 OF 7