Amcrest SmartHome AL-KIT1-PP Manuel de démarrage rapide - Page 3
Parcourez en ligne ou téléchargez le pdf Manuel de démarrage rapide pour {nom_de_la_catégorie} Amcrest SmartHome AL-KIT1-PP. Amcrest SmartHome AL-KIT1-PP 4 pages. Home alarm system
Également pour Amcrest SmartHome AL-KIT1-PP : Manuel de démarrage rapide (6 pages), Manuel de démarrage rapide (11 pages)
Imprimer la page
Pairing the Sensor
1. Locate the Alarm Hub on
the main menu.
2. Tap on the "+" icon to pair
the sensor to the hub.
3. Follow the on-screen
prompts to finish setting up
the sensor.
4. Test the sensor by moving
the small magnetic portion
along the right side of the
sensor. The LED on the
sensor will flash once it has
detected motion.
Note:
It is recommended to keep the small
magnetic portion 3/4" away from the sesnor. Do
not place the the small magnetic portion directly
on the sensor.
Installing the Sensor
Location tips:
•
Install the sensor in an indoor environment.
•
If you are using a door, place the sensor at the top of your door to
keep safe from being bumped and out of reach rom children or pets.
•
The sensor and magnet must be in line with each other and no
more than 3/4" apart.
Install the magnet to the right of the sensor.
IMPORTANT:
1. Choose an area for the sensor to be
placed such as a window or door.
2. Ensure that the bluetooth connection
is steady to the hub before mounting.
3. Peel the mounting adhesive, stick it
to the frame and attach the sensor.
Repeat this step for the magnet and
attach it to the door or window.
4. Open and close the door or window
to ensure the sensor stays in place.
For more information on
Note:
how to change a battery, please
5
visit
amcrest.com/support
3/4"
6