101VOICE IP3667 Manuel d'installation rapide - Page 9

Parcourez en ligne ou téléchargez le pdf Manuel d'installation rapide pour {nom_de_la_catégorie} 101VOICE IP3667. 101VOICE IP3667 13 pages. Ip door access control
Également pour 101VOICE IP3667 : Manuel d'utilisation rapide (2 pages)

Imprimer la page

IP3667

B. With 4 TA5*40mm screws, tighten the back panel on the wall according to diagram (6).

C. Connect the cables of RJ45, power, and electric-lock to the motherboard socket as mentioned

in connectors description (refer to Section 2).

D. Test whether there is electricity by doing the following:

Press the # button for 3 seconds to get the IP address of intercom by voice.

Input access password or press the indoor switch to check electric-lock installation.

Note: Do not proceed mounting until you have finished the electric check

Step 4: Mounting

Figure 8

A. With 6 screws unscrewed before, tighten the main part (together with rain shade) of intercom

on the back panel according to diagram (8).

B. Push the front panel into the plastic frame, and tighten it with 6 screws according to diagram (9).

Note: Make sure the screws have been tightened properly for better waterproof effect.

Figure 9