AMD RCS-100 Manuel de l'utilisateur - Page 8

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} AMD RCS-100. AMD RCS-100 12 pages. Multipurpose camera & scope system

Imprimer la page

• the image will be saved in Wiﬁ -SD (if used) or in internal

memory.

To record video

b) When video

mode is selected:

• Tap

to enter video capture mode

• Tap

or turn the wheel to start the video and

change to

• Tap

or turn the wheel to stop the video with showing

the saving reminder information. And the video will be

saved in Wiﬁ -SD (if used) or in internal memory.

9) Tap

to review the results of the photo or start the next

photo.

Imaging using optics module dermatoscope (DE)

The RCS-100 camera with dermatoscope lens is intended

to capture digital images and videos of the skin. The focus

position of the DE is preset at the factory, and in the "Der-

matoscope Focus Correction" in the Setting page, user can

reset the focus position (see the detail at section 8.6). The

dermatoscope has a ruler that can measure the length of the

part to be photographed. The picture brightness can be au-

tomatically adjusted by the system according to the illumina-

tion intensity of the subject in real time, and it can be adjus-

ted manually.The brightness level can be adjusted manually

from 0 to 6 (the default is 2). Illumination will turn off when

the brightness level is at the lowest level, and it will turn on

when the brightness level is more than the lowest level.

The device set for skin imaging consists of:

• Camera handset

• Attachable DE

•

9.1 Steps for skin imaging:

1) Clean the lens and the part of the skin area to be

photographed.

2) Hold the handset and hold the lens against the skin area

of the patient to be tested.

3) Tap

to enter adjust brightness

turn wheel or drag the process bar to adjust brightness

of the picture.

4) Click and drag one end of the ruler or hold the middle

of the ruler and move it in parallel to adjust the ruler to

the appropriate measurement angle and position.

5) Tap

to select a capture mode.

To take photos

a) When photo

mode is selected:

• Tap

to enter picture taking photo mode

• Tap

again or turn the wheel to capture photo.

• When the photo has captured,

the image will be saved in Wiﬁ -SD (if used) or in internal

memory.

To record video

b) When video

mode is selected:

• Tap

to enter video capture mode

• Tap

will

6) Tap

7) After the photo is taken, clean the part of the lens that

10 Imaging using optics module general lens (GE)

The RCS-100 camera with general lens has an object range

of 30 mm ~ 4 m, is intended to capture digital images and

video of mouth and throat.

The picture brightness can be automatically adjusted by the

system according to the illumination intensity of the subject

in real time, and it can be adjusted manually.

The brightness level can be adjusted manually from 0 to 6

(the default is 2). Illumination will turn off when the bright-

ness level is at the lowest level, and it will turn on when the

brightness level is more than the lowest level.

The device set for general imaging consists of:

• Camera handset

• Attachable GE

•

10.1 Steps for general imaging:

1) Hold the handle and move towards desired position. The

2) Tap

3) Tap

function and

4) Tap

a) When photo

• Tap

• When the photo has captured,

b) When video

• Tap

will change to

, and

• Tap

5) Tap

again or turn the wheel to start the video, and

will change to

or turn the wheel to stop the video with showing

the saving reminder information. And the video will be

saved in Wiﬁ -SD (if used) or in internal memory.

to review the results of the photo or start the next

photo.

camera contact with the patient.

lens should be about 35 mm from the required image.

to adjust brightness. Turn wheel or drag the

process bar to adjust the brightness of the picture.

to select manual/auto focus.

When

is selected, click on the position in the preview

area where you want to focus, the system will automati-

cally focus according to the selected position.

When

is selected, turn the wheel or drag the focus

progress bar on the touch screen to complete manual

focus.

to select a capture mode.

mode is selected:

to enter picture taking photo mode.

again or turn the wheel to capture photo.

the image will be saved in Wiﬁ -SD (if used) or in internal

memory.

mode is selected:

to enter video capture mode

again or turn the wheel to start the video, and

will change to

or turn the wheel to stop the video with showing

the saving reminder information. And the video will be

saved in Wiﬁ -SD (if used) or in internal memory.

to review the results of the photo or start the next

photo.

will change to

, and