AMD Lasers PICASSO Manuel de démarrage rapide - Page 6
Parcourez en ligne ou téléchargez le pdf Manuel de démarrage rapide pour {nom_de_la_catégorie} AMD Lasers PICASSO. AMD Lasers PICASSO 8 pages.
Également pour AMD Lasers PICASSO : Manuel d'utilisation (17 pages)
Imprimer la page
SUGGESTED APPLICATIONS GUIDE
TIP ITEM #
TIP LENGTH
DT2006020
20mm
DT3003005
5mm
DT3006010
10mm
DT4006005
5mm
DT4006010
10mm
To operate the wireless foot control, open the
1
cover by applying pressure to the right side
of closed foot switch with your foot.
To close the cover, push down
2
sharply on arrow at front of cover
with the ball of your foot.
FIBER CORE
DIAMETER
200µm
300µm
400µm
USING WIRELESS FOOT CONTROL
DIRECTIONS FOR INITIATING THE TIP
1A : PICASSO
Select "Continuous Mode"
Preset #4 (0.5) Watts
1B: PICASSO LITE
Select "Hygiene Mode" (0.5 Watts)
2:
Touch fiber tip on articulating paper then fire laser
for one second. Repeat several times. (See Picture Below)
Best results are obtained by initiating the tip with a
wax-based articulated paper similar to the "Bausch
Articulating Paper" supplied with the unit.
PLEASE DISCARD THE TIP AFTER EACH USE
AS THE TIPS ARE SINGLE USE ONLY.
Note that the green LED Indicator light glows to
3
indicate that the foot switch is operating when
you step on the pedal to fire laser.
Your wireless foot control has a corded
connection option.
To use the corded connection, remove
battery from foot pedal and connect the
supplied foot control cable (purchased
separately) to the back of the foot control,
and to the back of your laser on the
receptacle marked F.C.
(See Picture 2 in Step 1 | Set-Up section)