AME 15924 Manuel d'instruction et décomposition des pièces - Page 3
Parcourez en ligne ou téléchargez le pdf Manuel d'instruction et décomposition des pièces pour {nom_de_la_catégorie} AME 15924. AME 15924 4 pages. 5 quart air/hydraulic pump, steel reservoir
Également pour AME 15924 : Manuel d'instruction et décomposition des pièces (6 pages)
Imprimer la page
! WARNING !
This air hydraulic pump
is capable of generating
psi. Make certain the tool
in use is held securely
and is in proper working
condition. Do not continue
to operate the pump once
the work is completed.
Failure to comply with
these instructions could
result in personal injury or
damage to the equipment.
AME INTERNATIONAL
AME INTERNATIONAL
INSTRUCTION MANUAL
15924 INSTRUCTION MANUAL & PART LIST
& PARTS BREAKDOWN
5QT. AIR PUMP W/ STEEL RESERVOIR
MAINTENANCE
Inspect hosed and connections daily.
•
Inspect hose and connections daily.
Tighten connections as needed.
•
Tighten connections as needed.
•
Use non-hardening pipe thread compound when servicing connections.
compound when servicing connections.
•
Use only good quality hydraulic fluid.
•
We recommend Mobil DTE13M or equivalent.
or equivalent.
When not in use or during storage:
Depressurize and disconnect hydraulic hoses from application.
•
Depressurize and disconnect hydraulic hoses from application.
Wipe clean, thoroughly.
•
Wipe clean, thoroughly.
Store in clean, dry environment. Avoid temperature extremes.
•
Store in clean, dry environment. Avoid temperature extremes.
•
Shield pump with a protective cover.
Shield pump with a protective cover.
Adding Hydraulic Fluid
Depressurize and disconnect hydraulic hose from application.
1.
Depressurize and disconnect hydraulic hose from application.
2.
With pump in its upright, horizontal position, remove the oil filter plug
located on the top plate of reservoir.
located on the top plate of the reservoir.
3.
Use a small funnel to fill the reservoir to within
opening.
4.
Wipe up any spilled fluid and reinstall the oil filter plug.
Note: Use only good quality hydraulic jack oil
Note: Use only good quality hydraulic jack oil. Never use brake fluid,
Never
transmission fluid, turbine oil, motor oil, alcohol, glycerin etc. Use of other
glycerin etc. Use of other than good quality hydraulic oil will void warranty
than good quality hydraulic oil will void warranty and damage the pump,
and damage the pump, hose and application.
hose and application.
Changing Hydraulic Fluid
1.
For best results, change fluid once a year.
2.
Repeat #2 above, then pour used fluid into a sealable container.
3.
Dispose of fluid in accordance with local regulations.
4.
Fill with good quality hydraulic jack oil as recommended above.
F
l l i
i w
h t
g
o
o
d
q
u
l a
y t i
h
Reinstall vented oil filter plug.
Lubrication
Use a light machine oil to lubricate pivot points, hinges etc.
Use a light machine oil to lubricate pivot points, hinges, etc.
Note: Never operate pump with release valve closed and disconnected
Note: Never operate pump with release valve closed and disconnected from
from application. If operated in this condition, the hose and connections
application. If operated in this condition, the hose and connections become
become pressurized. This increases burst hazard. Damage may occur to
pressurized. This increases burst hazard. Damage may occur to pump and
pump and its components.
its components.
3
- 3 -
Use non-hardening pipe thread
3 / 4
" (19mm) of the
y
d
a r
u
c i l
a j
c
k
l i o
s a
e r
c
WWW.AMEINTL.NET
WWW.AMEINTL.NET
o
m
m
e
n
d
e
d
a
b
o
v
. e