AMENA WHV-B Series Manuel d'utilisation - Page 8
Parcourez en ligne ou téléchargez le pdf Manuel d'utilisation pour {nom_de_la_catégorie} AMENA WHV-B Series. AMENA WHV-B Series 16 pages.
Imprimer la page
Operation of wireless remote control
Note: Be sure that there are no obstructions between receiver and remote controller;
Don't drop or throw the remote control; Don't let any liquid in the remote control and
put the remote control directly under the sunlight or any place where is very hot.
Signal transmitter
Remote control
ON/OFF button
Press this button, the unit will be turned on,
press it once more, the unit will be turned
turning on or turning off the unit, the Timer, Sleep
function will be canceled,
MODE button
Press this button, Auto, Cool,Dry, Fan, Heat
This function is same cool mode)
AUTO(
The cooling function allows the air
COOL
conditioner to cool the room and at the
same time reduces Air humidity
This function reduces the humidity of the
DRY
air to make the room more comfortable.
The conditioner works in only ventilation.
FAN
HEAT
(This function does not exist.)
Name and function of wireless remote control
AH
MODE
TIMER
ECO
FAN
SLEEP
DISPLAY
SWING
SWING
MUTE
TURBO
I FEEL
HEALTH
off. When
ECO button
Press this button to activate / deactivate
the symbol
appears on the display.
The ECO function which enables the unit
automatically to sets the operation to achieve
energy savings.
FAN button
Press this button, Auto, Low, Middle, High
speed can be circularly selected. After powered
on, Auto fan speed is default.
LOW FAN SPEED indicator
MIDDLE FAN SPEED indicator
HIGH FAN SPEED indicator
AUTO FAN indicator
(FLASH)
TIMER button
Press this button for set up timer on / off
TIMER OFF indicator
The remote control and air conditioner are
switched on.
TIMER ON indicator
The remote control and air conditioner are
switched off.
The timer can preset between 0.5h to 24h, when the
time set less than "10" hours, the displayed time shown
by 0.5 hour as the unit, when the time set more than or
equal to "10" hours, the displayed time shown by 1 hour
as the unit.
SLEEP button
Press this button on the remote controller until the
symbol
appears on the display.
The function "SLEEP" automatically adjusts the
temperature to make the room more comfortable during
the night. In cooling or dry mode, the set temperature will
automatically raise by 1 every 60 minutes, to achieve a
total rise of 2 during the first 2 hours of operation.