Coachsound TML2504 Manuel de l'utilisateur - Page 12
Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} Coachsound TML2504. Coachsound TML2504 14 pages. Gps mono/stereo audio server
Imprimer la page
Coachsound TourMaster-Lite TML2504 User Manual v5.00
3.8.2 SAVING A WAYPOINT-MANUAL METHOD
1. Ensure that the system has a valid GPS fix;
2. Before approaching the location, use the segment keys to scroll to the segment that requires the new
GPS information;
3. Press and hold the PLAY key and then also press the ROUTE DOWN key (a.k.a. "SAVE WAYPOINT"). This
action needs to be performed within 5 seconds otherwise the system may resume autonomous mode.
4. You should have the following message on the panel. If you accidentally play the audio instead, you
must pause and stop the audio and try again;
SAVE WAYPOINT?
PLAY=Y, OTHERS=N
5. Press the PLAY key to enter the "save waypoint" function. You should then see the following message:
ARE YOU SURE?
PLAY=Y, OTHERS=N
6. When you are either stationary at, or travelling past the location, press PLAY again to confirm the save.
It is at this stage that the system reads the most current GPS location from the aerial.
7. Once saved by the system, you should see something similar to the following message. This is the GPS
co-ordinates of the location that was just saved. This is displayed so you can write down the co-
ordinates if required.
LAT: 01234.5678S
LON: 12345.6789E
8. Press PLAY again to return to normal operation.
Notes:
•
Once GPS waypoints are saved for ALL segments in the selected route, the display will change to "GPS
TRACKING..." and the system will become fully autonomous.
•
If the selected route has a "Chime Delay" setting, you need to take this into account when choosing the
location to save the new GPS position. If the chime delay is set to (say) 3 seconds, then the GPS location
to be saved should be 3 seconds before you arrive at the location at normal travelling speed.
•
When physically adding waypoints, power off the system and turn back on to allow the database to
update new information to the selected route.
12