10Bar E-500 Manuel de l'utilisateur - Page 3

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} 10Bar E-500. 10Bar E-500 12 pages. Camera housing

3. Function Controls E-500

1. Exposure Compensation

2. On/Off, Mode Dial

3. Bulkhead

4. Aperture

5. One-touch WB, Auto Focus

Point

4. Set up Instructions

4.1 Air Lock:

The body and lid are designed with the Air Lock system "no clip" closure arrangement.

Testing has shown that this arrangement allow the water to exert an even pressure on the O-

ring, increasing the reliability of the watertight seal.

4.2 Pressure release plug

To open the housing, the pressure release plug must be first unscrewed and then

pulled out all the way (Fig 1). This provides a passage for the air to pass though and

eliminate the pressure different between the inside of the housing and the ambient.

The plug consists of an internal double O-ring seal on the stainless steel slide shaft.

These internal O-rings form the watertight seal. There is also a large outer O -ring under the

knob. This O-ring serves to prevent contamination of the slide shaft, with dirt, salt etc., and is

not required for watertight integrity. If this O-ring should become detached, it can simply be

pushed back in place.

(Fig. 1) Open Housing Procedure

6. OK

7. WB, Metering Mode, AF, ISO

8. Copy

9. AEL / AFL

10. Pressure Release Plug

11. Play, Delete

12. MENU, INFO

13. Shutter

14. Zoom

9/6/2006