Coast to Coast ALU STAR 400-04650 Manuel de l'utilisateur

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} Coast to Coast ALU STAR 400-04650. Coast to Coast ALU STAR 400-04650 4 pages.

Imprimer la page

USER MANUAL ENGLISH

400-04650

ALU STAR

Deadweight of the cycle rack: 2.8 kg

Assembly instructions

Mount the hand wheel B to the tubular bracket using the screw G and the spring D(Fig 1). The cycle

rack should be mounted to the front support bar using the enclosed U-bracket U and knurled nuts

M (Fig 3). Mount the cycle rackto the roof support. Mount the cycle rack to the rear support. Push the

T-slide L into the bottom of the profile rail. Place the cycle rack onto the roof support and align. Use

the assembly plate and the toggle nuts to attach the cycle rack. Place the clamp jaws of the lower

plateJ to the front sloping frame part of the cycle and tighten using the hand wheel B. Attach pivot

screw using the lockable tog nut A. Slide the belt guides N into place before installing the end caps P

and tighten the wheels in the profile rail using the holding straps H (Fig ).

Safety information:

Check the screws for the first time after driving a short distance and then at regular intervals.

Please note that the load on the roof will change the driving properties of your vehicle during brak-

ing, in the case of side winds and when driving round bends. Adjust your driving speed according-

ly. In particular, observe the information provided by the manufacturer of the vehicle about the

permitted roof loads. Parts of the cycles, such as e.g. handlebars or pedals, should not protrude

over the edge of the roof. If not needed, the cycle rack should be dismantled for reasons of safety

for other road users and economy (petrol consumption). CAUTION: When the cycle is mounted,

note the greater height of your vehicle when entering underground car parks, tunnels etc. Before

setting off on your journey, always check that the attachments are all correct. IMPORTANT: Al-

ways use the supplied holding belt. Deadweight of the cycle rack: 2.8 kg

"More information https://www.caravansplus.com.au"